HA-1060EN Long Range Array Speaker
The HA-1060EN is composed of multiple horn speakers positioned in an array. It is a highly efficient speaker. Clear voice can be transmitted to a distant place without acoustic correction. The built-in high-pass filter cuts the bass that can damage the speaker. A double drip-proof structure, and a salt-resistant paint finish, it has excellent durability in an outdoor permanent environment.
|
Rated Input |
60 W |
|
Rated Impedance |
100 V line: 170 Ω (60 W), 330 Ω (30 W) 70 V line: 83 Ω (60 W), 170 Ω (30 W) |
|
Sensitivity |
111 dB (1 W, 1 ml (500 Hz - 5 kHz, IEC60268-5) |
|
Max. SPL |
128 dB (60 W, 1 ml (500 Hz - 5 kHz, IEC60268-5) |
|
Frequency Response |
520 Hz - 4.6 kHz (-10 dB) 350 Hz - 11 kHz (-20 dB) |
|
Speakers Component |
Horn speaker unit x 8 |
|
IP code |
IP66 |
|
EN 54-24 specifications |
Sensitivity: 89 dB (1 W, 4 m) Max. SPL: 106 dB (60 W, 4 m) Coverage Angle (-6 dB): IP Code: IP33C |
|
Speaker Cable |
4-core cabtyre cord 2 m |
|
Cable Gland |
Size: PG 13.5 - 12 (gray) ···1 Cable Diameter Range: 12.5 - 6.5 mm (0.49" - 0.26") Size: PG 13.5 - 08 (black) ···1 Cable Diameter Range: 9 - 4.5 mm (0.35" - 0.18") Two cable glands are factory-installed. |
|
Input Terminal |
Ceramic terminal (3-pole), can be bridge-connected ···1 Ceramic terminal (2-pole) ···1 Thermal fuse is included. |
|
Applicable Wire Size |
For Ceramic terminal (3-pole) Conductor: Solid wire or 7-core wire No bridge connection: 0.8 - 10 mm² (AWG 18 - 7) for solid wire, 0.8 - 8 mm² (AWG 18 - 8) for 7-core wire Bridge connection: 0.8 - 2.5 mm² (AWG 18 - 13) for solid wire, 0.8 - 1.5 mm² (AWG 18 - 15) for 7-core wire |
|
Operating Temperature |
-20°c to + 55 °c |
|
Finish |
Case: Aluminum, white (RAL 9016 equivalent), salt-resistant, paint Front grille: Aluminum, white (RAL 9016 equivalent), paint Bolts: Stainless steel |
|
Dimensions |
167 (W) x 1233 (H) x 140.5 (D) mm (excluding projection) |
|
Weight |
14 kg (unit only) |
|
Accessory |
Terminal box |
|
Option |
Speaker mounting bracket: YS-1100A |
Notes: The speaker must be installed upright or facing down. Installing the speaker in any other position may render the drainage hole ineffective, eventually leading to an electrical failure or other damage.
